A-1 Plumbing Services
Washington, DC · 20001 Local. Independent. Toilet specialists.

Dual-Flush Conversion in Washington, DC Near Me

Dual-flush conversion in Washington, DC, by retrofit kit or full toilet swap. Call A-1 Plumbing Services at (866) 303-3394.

Call (866) 303-3394 More services
Local plumbers
Repair or replace, your call
Price talked through first
One phone call to book

Dual-Flush Conversion in Washington, DC

A dual-flush toilet has two buttons: a partial flush for liquid waste and a full flush for solids. On a 1.28 gallon toilet, the short flush often uses well under a gallon.

A-1 Plumbing Services connects Washington, DC homeowners with plumbers who handle both routes. A retrofit kit replaces the existing flush valve and handle with a two-button valve inside the tank you already have. It costs less, but results vary with older bowl designs. A full dual-flush toilet costs more, and it flushes the way the manufacturer designed it to.

The plumber looks at your current bowl and tank, tells you whether a retrofit will clear the bowl well on the short setting, and installs whichever option you pick.

Some water utilities offer rebates on high-efficiency toilets. Check with yours before you buy.

Call A-1 Plumbing Services at (866) 303-3394 for a dual-flush conversion in Washington, DC.

How it works

Getting toilet repair booked in Washington, DC

01

Tell us what the toilet is doing

Running, rocking, leaking at the base or flushing weak. Each symptom points to a different part.

02

Talk through the price

We go over the likely fix and the price on the phone, then book a local plumber for Washington, DC.

03

Visit booked

A local plumber comes out at a time that works for you.

04

Fixed and tested

The plumber flushes it several times and checks the base and tank bolts before leaving. You pay the plumber directly.

Coverage

Toilet Repair Services Across Washington, DC

Toilet repair and toilet installation for the neighborhoods and ZIP codes around Washington, DC.

ZIP codes we serve

20001 20002 20003 20004 20005 20006 20007 20008 20009 20010 20011 20012 20015 20016 20017 20018 20019 20020 20024 20032 20036 20037 20045 20052 20057 20059 20064 20204 20220 20230 20240 20245 20250 20260 20317 20319 20390 20408 20415 20418 20422 20427 20431 20510 20515 20520 20530 20535 20540 20542 20551 20560 20565 20566 20591
Dual-Flush Conversion in Washington, DC

Toilet repair FAQs

Common questions about toilet repair and toilet installation

Questions we hear most often about Dual-Flush Conversion in Washington, DC.

Talk to a person
Why does my toilet keep running?
Nine times out of ten it is the flapper, the fill valve set too high, or a lift chain that is too short. A food coloring test in the tank tells you if the flapper is leaking.
Why does my toilet refill by itself every so often?
That is a ghost flush. Water is slowly leaking from the tank into the bowl, usually past a worn flapper or a pitted flush valve seat, until the fill valve kicks on to top it up.
Is water around the base of my toilet serious?
It can be. If it shows up after flushing, the seal under the toilet has likely failed and water is reaching the subfloor. Get it checked before the floor goes soft.
Can a cracked toilet tank be repaired?
Not reliably. Epoxy patches rarely hold under constant water pressure. The tank should be replaced, or the whole toilet if a matching tank is no longer made.
What size toilet do I need for my bathroom in Washington, DC?
Measure the rough-in from the finished wall to the center of the floor bolts. Most homes are 12 inches, and some older houses are 10 or 14 inches. Buy a toilet that matches.

Get a toilet repair price

Need Toilet Repair in Washington, DC? Call now.

Local plumbers for toilet repair and toilet installation in Washington, DC. Call (866) 303-3394 and go through the job and the price before anything is booked.

Call (866) 303-3394 Browse services
Call (866) 303-3394 Services